Bathroom sink faucets are not the same size and are not designed to fit all sinks universally. That said, excluding specialty built custom work, bathroom faucets are regularly manufactured in one of four different spacing configurations to accommodate the most common and popular faucet types: Single-Hole.

Are shower valves universal?

First, you absolutely CANNOT mix manufacturers on trim and rough-in valves. In fact, even within one manufacturer, they have many valves and the trims are not interchangeable. Shower sets are not always sold as separate trim and rough. In hardware stores and home centers they are almost always sold aa a complete set.

Are shower faucets interchangeable?

The handle and lid of the bath / shower faucet can usually be replaced with a universal replacement set (available in most hardware and hardware stores. Sanitary) without reinstallation. Unscrew the nozzles (Photo 2) or remove them if there is an adjustment screw underneath.

Are most shower valves universal?

Typically the valve you want will be R10000-UNBX or R10000-UNWS. These are the most commonly used and work for 99% of people. They are all universal and all Delta Shower Trim Kits will fit every single one of these valves.

Do bathroom faucets have a standard size?

Standard centerset faucet units, typically used on bathroom sinks, measure 4 inches on center. Standard widespread faucets measure between 8 and 16 inches on center.

How do I know what shower valve to buy?

Look at the center of the trim plate behind the shower handle to find a brand name or manufacturer symbol. If you see a K, the faucet is a Kohler unit; an M signifies Moen. American Standard, Delta and Price Pfister typically print their entire name on the faucet itself.

Can you replace shower handle without replacing valve?

The handle and trim for the tub/shower controls can also usually be replaced without redoing any plumbing by using a universal replacement kit (available for most brands at home centers and plumbing supply stores).

What faucets do plumbers recommend?

BEST OVERALL: Delta Faucet Leland Touch Kitchen Sink Faucet.BEST BANG FOR THE BUCK: WEWE Single Handle High Arc Pull Out Kitchen Faucet.BEST PULLDOWN: Moen Arbor One-Handle Pulldown Kitchen Faucet.BEST TOUCHLESS: Kohler Simplice Response Touchless Kitchen Faucet.BEST VOICE-ACTIVATED: Delta Faucet Trinsic VoiceIQ Faucet.

Can you replace a shower faucet without replacing the valve?

All you need to do is replace the handle and screw, since they are held with a single screw to the valve stem. Its less expensive to replace the valve stem if the screw threads are stripped.

How do I know what type of shower valve I have?

Look at the center of the trim plate behind the shower handle to find a brand name or manufacturer symbol. If you see a K, the faucet is a Kohler unit; an M signifies Moen. American Standard, Delta and Price Pfister typically print their entire name on the faucet itself.

Can you run two shower heads one valve?

Installing two shower heads in one shower is a great way to create a spa-like feeling in the bath. Frequently called his and hers shower heads, these two water sources may be operated independently from one another, or they may operate on the same valve.

Will any faucet fit my sink?

Bathroom Faucet Mounting Types Not all bathroom sink faucets work with every sink, so its important to make sure the faucet you choose will fit your sink or basin. Standard faucet drillings are centerset, single-hole or widespread.

What is the standard faucet size?

What are the standard faucet hole sizes for kitchens and bathrooms? The standard faucet hole sizes for kitchens and bathrooms are 1 3/8″ (1.375 Inches or 34.925 mm) in diameter unless otherwise mentioned in the specification. However, faucet holes may vary in size depending on the particular make and model.

How do I know what kind of faucet I have?

The most obvious and quickest solution is to look for a logo -- the manufacturers symbol -- that identifies its faucets. Each manufacturer has a distinctive logo that sometimes appears on the escutcheon -- the plate beneath the faucet -- the body of the faucet, the spout itself or somewhere on the handle.

How do I know if I need a new shower valve?

The first issue to look for is if there are any leaks in the valve when you turn on the water. If there are drips, thats a good indication that you should think about replacing the valve. Because, not only are you wasting water, but water that leaks behind the wall can cause rot as well as mold and mildew growth.

How much does a plumber charge to replace a shower faucet?

Install a Shower Faucet: national average cost The national average materials cost to install a shower faucet is $249.08 per faucet, with a range between $147.27 to $350.88. The total price for labor and materials per faucet is $562.02, coming in between $430.43 to $693.61.

Is Kohler or Moen faucets better?

So, if you have come down to Moen and Kohler, you may be wondering which brand is the best option. Ultimately, it comes down to the qualities you value most. Kohler tends to be more expensive but higher quality. Moen specializes in faucets specifically and has a wider array of style and design choices versus Kohler.

Is Delta or Moen faucets better?

Conclusion (Moen vs Delta) If you prefer touchless kitchen faucets, Moen is ideal. For Touch-on kitchen faucets and cheaper options, the Delta faucets may be the right choice. Nevertheless, choosing any faucet from the two brands will provide excellence and quality operation.

How much does it cost to install a second shower head?

Most plumbers can install a showerhead for about $75 to $150. As with most home improvement projects, the cost depends on the job size. While the plumber is at your house, you may have them upgrade additional fixtures or complete other repairs.

Why do some showers have 2 heads?

While not the most glamourous of benefits, a double shower head provides added practicality when it comes to cleaning your shower. The hand-held head makes cleaning your bath or shower enclosure much quicker and easier, and having two heads means you can also use one to clean the other.

How do I measure for a replacement faucet?

If you have separate handles for hot and cold, you have three holes in the sink. Measure the distance between the handles. Hold the the tape measure above the faucet if its in the way. If the distance is six inches or more you need a “widespread or “eight inch spread faucet.