Using a properly sized pipe for discharge will ensure that the sump pump will perform as the manufacturer intended. Installing discharge pipe of a larger size is not a huge problem and is in fact recommended for longer runs of pipe, typically 20 feet or more.

How far should sump pump hose be from house?

10 feet It is important to keep the discharge point of your sump pump as far from your foundation as possible. The minimum distance should be 10 feet. Most discharge pipes have a flexible hose tightly attached to the pipe coming from the basement. During non-freezing weather this works just fine.

Can I use a garden hose on a sump pump?

Sump pumps typically have a 1-1/4″ or 1-1/2″ outlet. The size of the discharge tubing should match this; that means dont use a garden hose. Using undersized discharge tubing, even at the exterior, will force the pump to run longer each time it turns on, decreasing the life of the pump.

Can you bury a sump pump discharge hose?

The line can get buried by mulch, dirt, or grass. This happens whether it is buried or not, but it is a good practice to check the end of the discharge every time you mow your lawn to ensure this doesnt happen. The line can freeze or get buried by snow, causing it to block the water flow.

Where should I run my sump pump hose?

Plan your garden near the bottom of a natural slope in your lawn, at least 10 feet from your foundation and downhill from your sump pump. To find the best spot, dig a hole 12 inches deep and fill with water. If the water is gone in 24 hours, then its the perfect place for a rain garden.

When should a sump pump hose be connected?

Currently, the 14-day forecast from The Weather Network is calling for lows until the 20th to still be below freezing, so it is best to keep your sump pump hose stored. Until then, if you are concerned about sump pump discharge, re-route the water using a large, flexible drain hose or consider placing a splash pad.

How do you keep a sump pump hose from freezing?

The best way to prevent a discharge line from freezing is with as much insulation as possible. To achieve this, you can try burying the line deeper underground, or try adding insulation using hay and a tarp. Give your sump pump a slight slope.

How do you connect a hose to a sump pump discharge?

Below is a guide on how to attach a hose to the sump pump.Step 1 - Purchase a Sump Pump Hose. There are special hoses that will connect neatly to the sump pump. Step 2 - Attach the Hose to the Sump Pump. Attach the hose to the sump pump. Step 3 - Clamp the Hose. Step 4 - Tighten the Clamp.Feb 2, 2010

Should I bury my sump pump line?

If your sump pumps discharge pipes are buried, leave a gap between the pipes. That way the water will still be able to discharge from the upper pipe even if the one in the ground is frozen. pipe buried 1 to 2 ft. underground.

Should you never unplug a sump pump?

The plastic weeping tile pipes terminates inside the pit, allowing the water to drain to the bottom of the sump, well below the floor slab. The reason that you should never unplug your sump pump is that water can drain into the sump pit at any time, even in the dead of winter.

Should sump pump run in winter?

While sump pumps do not run as often in the winter months as they do the rest of the year, there is a chance that melted snow or ice may necessitate its function. If it does kick in to remove excess water, even in the wintertime, you want to make sure it does so without failing.

Why is my sump pump hose leaking?

Your sump pump hose is likely attached with a clamp. If the clamp becomes damaged or loosened then, it could be the source of your leak. Hoses can sometimes become damaged from clamps being too tight as well, especially if the hose has ever been pulled or jerked by accident.