Yes, it is possible to use two (or even more than two) routers on the same home network. Conversely, a second router also helps when most clients in the home are wireless, but a few Ethernet devices in one room (like game consoles and file-sharing servers) could benefit from a wired setup.
Can you use a second router as an extender?
At the cost of some performance, you can extend WiFi range with another router without a cable by setting up the new router as a wireless repeater. The job of a wireless repeater is simple: rebroadcast the signal from your main router.
Can I set up a second router in my house by connecting to a cable outlet?
You can use a second router (theyre usually cheaper, around $25 instead of $75-100 for the HME, so thats what I did), but you have to configure the second one in a special way so it works as a bridge and doesnt try to overtake the other router.
How can I extend my WiFi range with another router without cable?
At the cost of some performance, you can extend WiFi range with another router without a cable by setting up the new router as a wireless repeater. The job of a wireless repeater is simple: rebroadcast the signal from your main router.
Can I use a second router as an extender?
The simplest and most effective way to extend your WiFi network with a second router is to use an Ethernet cable between the two devices. Connect one end of the Ethernet cable to any of the regular Ethernet ports on the main router. Then, connect the other end of the Ethernet cable to the old routers WAN port.
How can I extend my WiFi with another router?
You can easily extend your Wi-Fi network with additional networking hardware like Wi-Fi repeaters and Wireless Access Points. The other inexpensive option is that you get hold of an old wireless router, one that is longer in use, and connect it to your existing (main) router using an Ethernet (Cat5) cable.
Can I plug my WiFi router into any cable outlet?
It should be safe to try moving the modem to another jack. You may have one or more splitters in your system that originate from the one line coming from the ISP. Each splitter will reduce the signal. A well designed system will try to have the same signal loss to each coax outlet.